IMX e4010 H.264 Video Encoder

IMX e4080HD

 
     
 

IMX e4080HD H.264 High Definition Video Encoder


The IMX e4080HD video encoders are designed to deliver high definition 720p and 1080i videos over IP even with bandwidth constraints. The IMX e4080HD series live video encoder is designed to work with IMX i2410 and IMX X1i live MatrixCast Streaming servers to streaming live videos over a private IP network or the Internet. IMX e4080HD encoder is optimized to work with MatrixStream's MatrixCast Streaming protocol.

 


IMX e4080HD High Definition Video Encoder

Input/Output Ports

 

Video Inputs

HD-SDI (SMPTE292M)

Audio Inputs

Embedded in SDI

Output Interface

2x Gigabit Ethernet ports
1x Ethernet dedicated to service streaming

1x Ethernet Out-of-band, dedicated to management

1x DVB-ASI (75 Ohm BNC connector)

 

 

 

IMX e4080HD High Definition H.264 encoder back view

 

Key Benefits

     

Low-profile 1U rack-mounted design for reduced cost-per-channel

Minimal bandwith required to stream HD content: 1.5 Mbps for HD 720p, 2.5 Mbps for HD 1080i and 3.5 Mbps for HD 1080p. Recommended raw bandwith for broadband connection is at minimal 2 times of the stream required. Ex: 3+ Mbps broadband connection is required to stream HD 720p over the Internet

 

IMX e4080HD encodes live high definition H.264 video at resolutions of 1080i x 1440, 1280 and 960 pixels

Interfaces to digital AV equipment via the HD-SDI interface

Encoding bitrate can be selected from 1 to 25 Mbps depending on application

Supported frame rates 1080i@25, 29.97 and 30 HZ

Dual Gigabit Ethernet LAN ports provide additional performance and redundancy. Seperate ethernet ports for service streaming and out-of-band management.

Management by front panel with LCD/Keypad, embedded Web server configuration and SNMP (MIB v2C) with remote SNMP supervisor

Work Seamlessly with IMX Server Series - IMX e4080HD video encoders are optimized to support MatrixStream's MatrixCast Streaming protocol over the Internet. This means IPTV providers can stream full screen high definition videos over the Internet. MatrixStream MatrixCast Streaming currently supports H.264 video codec only.

     

IMX e4080 HD Video Encoder Deployment Diagram

The following is an example of how the IMX e4080HD IPTV HD video encoders are deployed in a live service provider environment. IMX e4080HD video encoders are taking live satellite feeds and encodes the video into HD 1080i H.264 format. Once videos are encoded, streams are sent to IMX X1i MatrixCast Streaming server for live streaming across the Internet. All the interactions between all the different servers are being managed by IMX M2200 middleware server.



IMX e4080HD HD 1080p  Video Encoder Deployment